<h2>v2.33.0</h2>
2025-12<br>

<b>New Features</b>
<ul>
	<li>Support for multiple machine profiles</li>
	<li>Allows you to clip away surfaces to view underlying lines and points. Customers can now have multiple machines installed with sensors and move the tablet and GNSS unit between them.</li>
	<li>Support for MIC 4.0 (Beta). Introduced support for tilt and rotation angles provided by machines and attachments running with the MIC 4.0 CAN protocol.</li>
	<li>Support for “Lowest toolpoint”. You can now activate the lowest toolpoint in the bucket menu to simplify logging when switching between left and right corners of the bucket. The lowest toolpoint automatically adjusts between them.</li>
	<li>New coordinate systems: Faroe Island FOTM_FV09, Faroe Island Geoid FO_geoid12A, UTM31_8, UTM32_8, UTM33_8.</li>
	<li>Support for French (Canadian).</li>
	<li>Simplified reference menu for entry-level markets.</li>
	<li>Option to turn off screen indicators on the work screen.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Invisible surfaces. In some cases, an error caused surfaces to be invisible to the operator.</li>
	<li>App freeze during point logging. Fixed an error that caused the app to freeze if points were logged too quickly in succession.</li>
</ul>


<h2>v2.32.0</h2>
2025-11-12<br>

<b>Improved graphical performance</b>
<ul>
	<li>When logged in as a developer, you can now test a new feature: Graphical Clipping</li>
	<li>Allows you to clip away surfaces to view underlying lines and points.</li>
	<li>Support for new control methods in the clipping menu called ”Gizmos”</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Improved performance on Android 11 devices.</li>
</ul>


<h2>v2.31.0</h2>
2025-10-17<br>

<b>Improvements</b>
<ul>
	<li>GNSS menu: Internal changes has been made to allow for improved robustness and scalability of the software in the future - no changes has been done to the user interface in this release.</li>
	<li>As-built data export to USB: It is now possible to export As-built photos to a USB device.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Tiltpole (heading): Solved an issue where heading was rotated 180° on Survey running with Tersus receivers.</li>
</ul>


<h2>v2.30.0</h2>
2025-08-20<br>

<b>New machine type: Compactor</b>
<ul>
	<li>The compactor is a dual GNSS system with a CMV sensor to measure the compaction meter value. All compaction data will be logged and can be exported from the Makin' Cloud for further postprocessing.</li>
</ul>

<b>New feature: Infield Design</b>
<ul>
	<li>The first version of Infield Design is available, and it can be found under the + in the project dialog (References), where you can create points, lines, profiles, and now also Infield design.</li>
	<li>Infield Design is where the operator can create: Points, Lines, Surfaces, Set boundaries, Calculate volumes and areas.</li>
</ul>

<b>New hardware support: Tersus GNSS survey receiver</b>
<ul>
	<li>Makin is introducing a new Survey receiver with tilt pole and radio. </li>
</ul>

<b>Improvements</b>
<ul>
	<li>New excavator model: Medium and Large model can be selected.</li>
	<li>New geometries: Dozer and Snow Groomer for Tool Guidance.</li>
	<li>Auto snapshot of calibration files.</li>
	<li>Saves the latest calibration changes done on the machine.</li>
	<li>Automatic sign out of technical password after two hours or restart of the tablet.</li>
</ul>


<h2>v2.29.2</h2>
2025-04-09<br>

<b>Improvements</b>
<ul>
	<li>Support DC-files with zero horizontal scaling.</li>
	<li>Updated technocal password.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Disable deleting local project settings after 1 year of inactivity.</li>
	<li>Update correction profile faster.</li>
	<li>Fixed a 3D text related crash.</li>
</ul>


<h2>v2.29.1</h2>
2025-03-19<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed boom length issue.</li>
	<li>Fixed tiltrotator not working.</li>
</ul>


<h2>v2.29.0</h2>
2025-03-14<br>

<b>Bugfixes</b>
<ul>
	<li>Removed option to close 'Measuring point'.</li>
	<li>Limit as-built attribute length to 60 characters.</li>
	<li>As-built bugfixes.</li>
	<li>Stability improvments.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>Surfacelog: Added cleanup pass for space conservation.</li>
	<li>Geodesy: make adding adn removing coordinatsystems take effect immidiately.</li>
</ul>


<h2>v2.28.4</h2>
2025-03-12<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed loading some DXF-files.</li>
</ul>


<h2>v2.28.3</h2>
2025-02-25<br>

<b>Bugfixes</b>
<ul>
	<li>Much improved GNSS calibration.</li>
	<li>Fixed linepoints not being removed when line is removed.</li>
</ul>


<h2>v2.28.2</h2>
2025-02-11<br>

<b>Bugfixes</b>
<ul>
	<li>Added fixes from v2.27.x-releases.</li>
</ul>


<h2>v2.28.1</h2>
2025-02-07<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed handling of as-built on secret projects.</li>
	<li>Reintroduce autonaming of as-built points.</li>
</ul>


<h2>v2.28.0</h2>
2025-02-05<br>

<b>Bugfixes</b>
<ul>
	<li>Fix pole being 0 in receiever whenever receiver start up.</li>
	<li>Technician mode is no longer restored after restart.</li>
	<li>Avoid "measure point later" during GNSS calibration affect later calibrations.</li>
	<li>Changed order of minimized ref. dialog icons to match maximized ref. dialog.</li>
	<li>Fixed a number of as-built-related crashes.</li>
	<li>Highlight the antenna during calibration.</li>
</ul>

<b>Improvement</b>
<ul>
	<li>DXF: Improve sppeed and memory efficiency during load.</li>
	<li>SteelWrist tilt rotator support (BETA).</li>
	<li>Support for dogbone mounted bucket sensor.</li>
	<li>Support for tilt-pole on Hemisphere S631.</li>
	<li>Velocity aid for improved sensor performance.</li>
</ul>


<h2>v2.27.8</h2>
2025-02-11<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed rare crash at startup related to datausage classification.</li>
</ul>


<h2>v2.27.7</h2>
2025-02-10<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed handling of as-built on secret projects.</li>
	<li>Reintroduce autonaming of as-built points.</li>
	<li>Avoid "measure point later" during GNSS calibration affect later calibrations.</li>
	<li>Highlight the antenna during calibration.</li>
</ul>


<h2>v2.27.6</h2>
2025-01-14<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed Engcon tilt rotator not working.</li>
	<li>Other minor bugfixes.</li>
	<li>Complete input field calculations when pressing Ok.</li>
	<li>Fixed minor issues with as-built attributes handling.</li>
	<li>Disable sync after bucket calibration avoiding unwanted overwrite events.</li>
</ul>

<b>Improvement</b>
<ul>
	<li>Show GNSS height on all screens.</li>
	<li>Use correct flat angle joint name.</li>
	<li>Added better handling of errors in translations.</li>
	<li>Manuals are now downloaded correctly.</li>
	<li>Support .sid geoid format.</li>
</ul>


<h2>v2.27.5</h2>
2024-12-16<br>

<b>Bugfixes</b>
<ul>
    <li>Fixed crash during GNSS calibration.</li>
    <li>Other minor bugfixes.</li>
</ul>

<b>Improvement</b>
<ul>
	<li>Added less detailed Wheel Loader model.</li>
</ul>


<h2>v2.27.4</h2>
2024-12-12<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed crash during GNSS calibration.</li>
	<li>Other minor bugfixes.</li>
</ul>


<h2>v2.27.3</h2>
2024-12-05<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed customer attributes not being selectable.</li>
</ul>


<h2>v2.27.2</h2>
2024-11-29<br>

<b>Improvement</b>
<ul>
	<li>New dutch translation.</li>
	<li>Limit allowed characters in as-built linepoints.</li>
	<li>Do a synchronization after creating calibration backups.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fixed wrong project offset after changing application.</li>
	<li>Ensure that machine speed is always viusible.</li>
	<li>Avoid storing surfacelog data indefinitely.</li>
	<li>Fixed crash during as-built edit.</li>
</ul>


<h2>v2.27.0</h2>
2024-11-19<br>

<b>Improvement</b>
<ul>
	<li>Extend maps display in top views.</li>
	<li>Make display of text-geometries and labels follow the view.</li>
	<li>Synchronize calibration to server when it changes not just on startup.</li>
	<li>LOK localization file updates.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fixed many corner cases the as-built functionallity.</li>
	<li>Fix remote machines not displayed correctly.</li>
	<li>Improve maps stability.</li>
</ul>


<h2>v2.26.8</h2>
2024-11-19<br>

<b>Bugfixes</b>
<ul>
	<li>Flat angle calibration is now saved.</li>
	<li>Fixed regression in correction profiles.</li>
</ul>


<h2>v2.26.7</h2>
2024-11-12<br>

<b>Improvement</b>
<ul>
	<li>Improved handling of profile surface.</li>
	<li>Avoid stalling the application during chat messages fetch.</li>
	<li>Improved GNSS calibration when antennas have different heights.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fixed sensor inversion not vworking in Tool Guidance.</li>
	<li>Fix small graphics issues.</li>
	<li>NTRIP: Support ICY ntrip caster.</li>
	<li>Fixed project rename not working is certain situations.</li>
</ul>


<h2>v2.26.6</h2>
2024-10-23<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed bug in autoselect of cal file geoid.</li>
	<li>Fixed crash when trying to take a picture without camera permission.</li>
	<li>Wheel Loader: Fixed overlapping graphics.</li>
	<li>Wheel Loader: Added missing plus-icon for point edition.</li>
	<li>As-built: Always allow selection of object type.</li>
</ul>


<h2>v2.26.5</h2>
2024-10-16<br>

<b>Improvement</b>
<ul>
    <li>Updated translations.</li>
</ul>

<b>Bugfixes</b>
<ul>
    <li>Fixed interface-box lockup problem.</li>
	<li>Fixed flickering plane direction on Wheel Loader.</li>
</ul>


<h2>v2.26.4</h2>
2024-10-10<br>

<b>Improvement</b>
<ul>
	<li>Display other machines within 2000 m instead of just 500 m.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>As-built improvements and bugfixes. Both for points and lines.</li>
	<li>Roll calibration was not saved in Tool Guidance. Fixed.</li>
</ul>


<h2>v2.26.3</h2>
2024-10-01<br>

<b>Improvement</b>
<ul>
	<li>Minor fixes and improvements.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fixed issues relating to updating attributes on cloud.</li>
</ul>


<h2>v2.26.2</h2>
2024-09-26<br>

<b>Improvement</b>
<ul>
	<li>As-built attribute improvements.</lI>
	<li>Allow Hemisphere S631 (Bluetooth) in Survey again.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Avoid infinite startup crash when closing the app during tool deletion.</li>
	<li>Linepoints could be visible after remove. Fixed.</li>
	<li>Do a server sync after importing files into project.</li>
</ul>


<h2>v2.26.1</h2>
2024-09-19<br>

<b>Improvement</b>
<ul>
	<li>Updated translations.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Make sure to refresh attributes after server sync.</li>
	<li>Make area selection work in top view.</li>
	<li>Disabled beta auto-calibration.</li>
</ul>


<h2>v2.26.0</h2>
2024-09-12<br>

<b>Improvement</b>
<ul>
	<li>Allow backup and restore of machine calibration.</li>
	<li>New improved calibration procedure.</li>
	<li>Fat finger selection.</li>
	<li>Machine: Disallow click on remote machine parts.</li>
	<li>Update interface box firmware.</li>
	<li>Added trafic usage statistics.</li>
</ul>


<h2>v2.25.4</h2>
2024-09-26<br>

<b>Improvements</b>
<ul>
	<li>Limit logpoint offset to max +-1000 meters.</li>
</ul>

<b>Bugfix</b>
<ul>
	<li>Fixed wrong orientation of leftview on Wheel Loader.</li>
	<li>Fixed slow pointlogging on projects containing af lot of logpoints.</li>
	<li>Stability improvements.</li>
</ul>


<h2>v2.25.3</h2>
2024-08-27<br>

<b>Bugfix</b>
<ul>
	<li>Be less strict about the CAL-file format.</li>
</ul>


<h2>v2.25.2</h2>
2024-08-26<br>

<b>Improvements</b>
<ul>
	<li>Removed "Project offset" from all 2D modes.</li>
	<li>Added a new icon to indicate no-image under logpoints.</li>
	<li>Removed 2D functionality from "Tool Guidance".</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fixed opacity on machine models.</li>
	<li>General fixes and stability improvements.</li>
	<li>Bring back display of FZ-A2 serial numbers on cloud.</li>
	<li>Avoid duplicates name for as-built points.</li>
	<li>Avoid double GNSS-errors/warnings on cloud.</li>
	<li>Fixed problem with Wheel Loader cross slope view.</li>
</ul>


<h2>v2.25.1</h2>
2024-08-9<br>

<b>Improvements</b>
<ul>
	<li>General fixes and stability improvements.</li>
</ul>


<h2>v2.25.0</h2>
2024-06-27<br>

<b>Improvements</b>
<ul>
	<li>New machine type: Wheel Loader.</li>
	<li>Added "secret project"-support. For sensitive projects which must not sync information to the server.</li>
	<li>Improve visibility of arrow-indicators in light mode.</li>
	<li>Show current machine speed.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Place elevation correctly under the height arrow.</li>
	<li>Fixed some of the map "jumping" during pointlogging.</li>
</ul>


<h2>v2.24.13</h2>
2024-08-06<br>

<b>Bugfixes</b>
<ul>
	<li>LandXML: Improved handling of specific files.</li>
	<li>Improved memory usage degradation since 2.23.x.</li>
	<li>Manuals are now displayed in current language.</li>
	<li>Fixd tilt-calibration for Engcon integrated tilt sensor.</li>
	<li>Fixed menues not changing correctly when toggle between 2D and 3D.</li>
	<li>Improved log point/line stability.</li>
</ul>


<h2>v2.24.12</h2>
2024-07-03<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed crash during fetch of maps data.</li>
</ul>


<h2>v2.24.11</h2>
2024-06-27<br>

<b>Improvements</b>
<ul>
	<li>Support UK coordinatesystems.</li>
	<li>Added missing text scroll in some dialogs.</li>
</ul>

<b>Bugfixes</b>
<ul>
    <li>Fix cutlines not adhering to the upper/lower setting.</li>
	<li>Fix as-built not being displayed when loading a project for the first time.</li>
</ul>


<h2>v2.24.10</h2>
2024-06-14<br>

<b>Improvements</b>
<ul>
	<li>Increase allowed project size by 20%</li>
</ul>


<h2>v2.24.9</h2>
2024-06-10<br>

<b>Bugfixes</b>
<ul>
	<li>Surfaces: Fixed wrong handling of certain layers.</li>
	<li>LogLine: update temporary line height during line logging.</li>
	<li>LandXML: Fix slow file loading for files containing breaklines.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>Fetch maps data using improved API.</li>
</ul>


<h2>v2.24.8</h2>
2024-06-05<br>

<b>Bugfixes</b>
<ul>
	<li>Avoid freezing during long project loads.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>GNSS: Enable Hemispohere S631 for rover.</li>
</ul>


<h2>v2.24.7</h2>
2024-05-31<br>

<b>Bugfixes</b>
<ul>
	<li>Licenses: Handle expired licenses better.</li>
	<li>General stability fixes.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>NTRIP: Support multiple user/password for each server.</li>
</ul>


<h2>v2.24.6</h2>
2024-05-22<br>

<b>Bugfixes</b>
<ul>
	<li>Fix tilt-calibration of Engcon tilt encoder.</li>
	<li>Report error of tilt axis is vertical.</li>
	<li>LandXML: Support out-of-order of points in Alignment Spiral/Curve.</li>
	<li>Fix wrong placement of texts in the graphics.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>NTRIP: show the password in cleartest during editiong.</li>
	<li>Display elevation (H) with larger font if N+E is hidden.</li>
</ul>


<h2>v2.24.5</h2>
2024-05-13<br>

<b>Bugfixes</b>
<ul>
	<li>Avoid stalls during repetitive pointlogging.</li>
	<li>Fix stakeout not working when targeting single segment alignment.</li>
	<li>Fixed missing translations.</li>
</ul>


<h2>v2.24.4.1</h2>
2024-05-14<br>

<b>Bugfixes</b>
<ul>
	<li>Avoid USB icon in project listing.</li>
	<li>Correctly migrate bandwidth and base ID for UHF correction profiles.</li>
	<li>Reenable VR1000 Web UI.</li>
</ul>


<h2>v2.24.4</h2>
2024-05-03<br>

<b>Improvements</b>
<ul>
	<li>Reduced receiver setup duration - primarily S631.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Removed unused extra third GNSS antenna.</li>
	<li>Minor bugfixes.</li>
</ul>


<h2>v2.24.3</h2>
2024-04-25<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed wrong calibration position of city boom.</li>
</ul>


<h2>v2.24.2</h2>
2024-04-24<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed wrong orientation of city boom.</li>
</ul>


<h2>v2.24.1</h2>
2024-04-23<br>

<b>Improvements</b>
<ul>
	<li>General improvements and fixes.</li>
</ul>


<h2>v2.24.0</h2>
2024-04-16<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed pitch/roll offset values sometimes being set to 0.0</li>
	<li>Fixed issue where geometry was not shown on startup or view changes.</li>
	<li>Fixed a crash in the sensortest screen.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>Added Tool Guidance.</li>
	<li>Added fixpoint control - machine calibration test.</li>
	<li>Machine configurator for toggling city boom.</li>
	<li>Allow setting measure-time and -delay for as-built and own points.</li>
	<li>Added project-filter to only load parts of projects.</li>
	<li>NTRIP/UHF correction profiles.</li>
	<li>Integration to TenStar.</li>
</ul>


<h2>v2.23.17</h2>
2024-03-22<br>

<b>Bugfixes</b>
<ul>
	<li>Avoid hiding chat-dialog behind the menu.</li>
    <li>Fixed issue where the Jog-gui could be hidden after orientation changes.</li>
	<li>Fixed a crash when longholding error messages in the reference dialog.</li>
	<li>Fixed texts sometimes overlapping in the menus.</li>
	<li>Make "ignore missing sensors" take effect immediately.</li>
	<li>Make sure to change line when selecting other geometry during line logging.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>Added support for changing UHF-protocols.</li>
</ul>


<h2>v2.23.16</h2>
2024-03-05<br>

<b>Bugfixes</b>
<ul>
	<li>Always allow "set plane here" quick button.</li>
	<li>Fixed geoid selection for local projects.</li>
	<li>Fixed a number of instabilities in the logline functionality.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>Geodesy: Support German systems.</li>
</ul>


<h2>v2.23.15</h2>
2024-02-20<br>

<b>Bugfixes</b>
<ul>
	<li>Make manual download work again.</li>
	<li>Fixed a number of crashes during changes in application and license.</li>
	<li>Fixed a number of as-built line bugs.</li>
	<li>Fixed +/- being available when entering lengths.</li>
	<li>Prompt the user for aceept when deleting user points/lines.</li>
	<li>Fixed code selection in MakinWin.</li>
	<li>Fixed issue where calibrations points would be identical.</li>
	<li>Bring back "Auto hide RMS" in PerFormans.</li>
</ul>


<h2>v2.23.14</h2>
2024-02-01<br>

<b>Bugfixes</b>
<ul>
	<li>Fix as-built edits not being transmitted until after restart.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>Minor GNSS-calibration changes.</li>
	<li>Minor visual changes.</li>
</ul>


<h2>v2.23.13</h2>
2024-01-24<br>

<b>Bugfixes</b>
<ul>
	<li>Fix backspace handling when entering numbers.</li>
	<li>Allow extra precision when entering measurement points during calibration.</li>
	<li>Avoid placing the menu on top of the GNSS-receiver list.</li>
</ul>

<h2>v2.23.12</h2>
2024-01-19<br>

<b>Improvements</b>
<ul>
	<li>Use improve point editor during calibraiton.</li>
</ul>

<h2>v2.23.11</h2>
2024-01-17<br>

<b>Improvements</b>
<ul>
	<li>New sensor firmware added.</li>
	<li>Improve behavior of numpad.</li>
	<li>Search for pointcodes recusively in project folder.</li>
	<li>Improved tilt rotator warning.</li>
	<li>Allow surface logging while driving below 5 km/h.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>Fixed a case where the RMS value would be reported wrong.</li>
</ul>


<h2>v2.23.10</h2>
2024-01-04<br>

<b>Improvements</b>
<ul>
	<li>Improve license handling.</li>
</ul>


<h2>v2.23.9</h2>
2024-01-03<br>

<b>Improvements</b>
<ul>
	<li>Improve license handling.</li>
	<li>Translations updates.</li>
</ul>


<h2>v2.23.8</h2>
2023-12-15<br>

<b>Improvements</b>
<ul>
	<li>Allow technicians to updates sensors.</li>
</ul>


<h2>v2.23.7</h2>
2023-12-14<br>

<b>Improvements</b>
<ul>
	<li>Translation updates.</li>
	<li>Allow new preview features without restart.</li>
	<li>Only allow superuser to updates sensors.</li>
</ul>


<h2>v2.23.6</h2>
2023-12-07<br>

<b>Bugfixes</b>
<ul>
	<li>As-built line: Make sure that the dashed line is drawin from the correct point.</li>
	<li>As-built: Fix bug where as-built from other systems is not fetched.</li>
	<li>Allow overwrite after pressing "Undo" fx. when setting offset.</li>
</ul>


<h2>v2.23.5</h2>
2023-12-06<br>

<b>Bugfixes</b>
<ul>
	<li>GNSS: Fixed RMS calculation.</li>
	<li>As-built line: Fixed a number of minor issues when creating and editing lines.</li>
</ul>


<h2>v2.23.4</h2>
2023-11-24<br>

<b>Bugfixes</b>
<ul>
	<li>Fix UI stall when logging as-built points.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>Improve performance when loading large number of as-built data.</li>
</ul>

<h2>v2.23.3</h2>
2023-11-14<br>

<b>Bugfixes</b>
<ul>
	<li>Removed a ressource leak which could crash the system after a long time.</li>
	<li>Avoid dialogs being below the reference dialog.</li>
	<li>Fixed GNSS device not initializing when changing application.</li>
	<li>Only allow sensor upgrade for technicians.</li>
</ul>


<h2>v2.23.2</h2>
2023-11-3<br>

<b>Improvements</b>
<ul>
	<li>Zoom to bucket instead of teh machine body.</li>
	<li>Allow minimizing and maximizing dialogs in horizontal mode.</li>
	<li>Migrate create point and create line to new UI.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Surfacelog: Avoid serverside layerlist greating excess layers in some cases.</li>
	<li>General stability improvements.</li>
	<li>Fix wireframe toggle.</li>
</ul>


<h2>v2.23.1</h2>
2023-10-17<br>

<b>Improvements</b>
<ul>
	<li>Sanitize project names to disallow invalid characters.</li>
	<li>Use new UI when editing linepoints.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fixed application freeze when ending a logline.</li>
</ul>


<h2>v2.23.0</h2>
2023-09-28<br>

<b>Improvements</b>
<ul>
	<li>Support for photo-attachments to logpoints and lonepoints.</li>
	<li>Improved the logline functionality.</li>
	<li>Added project-filter to allow filtering large projects.</li>
	<li>Added flatangle visualization.</li>
	<li>Many UI updates.</li>
</ul>


<h2>v2.22.10</h2>
2023-10-24<br>

<b>Improvements</b>
<ul>
	<li>Increased max DXF line length.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Confirmation dialog showing above reference selector.</li>
	<li>Deleting correct bucket.</li>
	<li>Fixed point collision with vertical offset.</li>
	<li>Log point offset working correctly.</li>
	<li>Round error using +/- in numeric keyboard.</li>
</ul>


<h2>v2.22.9</h2>
2023-08-28<br>

<b>Bugfixes</b>
<ul>
	<li>Do not allow deletion of as-built from other systems.</li>
	<li>Changed sensor firmware to correct version.</li>
</ul>


<h2>v2.22.8</h2>
2023-08-25<br>

<b>Improvements</b>
<ul>
	<li>Added support for additional sensor firmware versions.</li>
	<li>Improve tracability of sensor updates.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fixed unstability of the stakeout function on large projects.</li>
	<li>Bring back the close-button in the web broswer.</li>
	<li>DXF: Handle ACI colors outside valid range.</li>
	<li>DXF: Fixed minor bug in the DXF reder which might cause a crash in rare cases.</li>
</ul>

<h2>v2.22.7</h2>
2023-07-07<br>

<b>Improvements</b>
<ul>
	<li>Fixed difficulties selecting surfaces and lines in 3D view.</li>
	<li>Linepoint: Fixed issue with project offset.</li>
</ul>


<h2>v2.22.5</h2>
2023-06-28<br>

<b>Improvements</b>
<ul>
	<li>VR1000: Update firmware if the version is different.</li>
</ul>
	
<b>Bugfixes</b>
<ul>
	<li>Fixed icon bugs in reference dialog.</li>
</ul>


<h2>v2.22.2</h2>
2023-06-20<br>

<b>Improvements</b>
<ul>
	<li>Hide surfaces in bullseye view.</li>	
	<li>Improved selecting points - aspecially line points.</li>
	<li>Support for CAL files with NM identifier.</li>
</ul>

<h2>v2.22.1</h2>
2023-06-01<br>

<b>Improvements</b>
<ul>
	<li>Allow adding points/layers/lines with less than RTK position.</li>
	<li>Improve handling when using XBox gamepad.</li>
	<li>Allow stakeout to sidderef again.</li>
</ul>

<h2>v2.21.7</h2>
2023-05-30<br>

<b>Improvements</b>
<ul>
	<li>Plane: Increase plane size by 5 meters to support larger machines.</li>
	<li>Makin' Surfaces: Avoid spontanous lockup on certain surfaces.</li>
</ul>


<h2>v2.21.6</h2>
2023-05-25<br>

<b>Improvements</b>
<ul>
	<li>Tiltrotator: Initial support for CompactTilt.</li>
	<li>Makin' Surfaces: Added better sanity checks of input toolpoints.</li>
	<li>Makin' Surfaces: Load layer-list and OGL from Infrakit project layout.</li>
</ul>

<h2>v2.21.5</h2>
2023-05-16<br>

<b>Bugfixes</b>
<ul>
	<li>Bring back project offset for stakeout and PerFormans.</li>
	<li>Remember selected references for geometries with very long names.</li>
	<li>Fixed lockup in sensor test.</li>
	<li>Fixed potential crash related to rendering labels.</li>
</ul>


<h2>v2.21.4</h2>
2023-04-28<br>

<b>Bugfixes</b>
<ul>
	<li>Avoid double icons in the runscreen during stakeout.</li>
    <li>External buttons: Fixed longhold on TP selection.</li>
</ul>


<h2>v2.21.3</h2>
2023-04-11<br>

<b>Improvements</b>
<ul>
	<li>Updated the swedish translation.</li>
    <li>Makin' Surfaces: Periodically store tiles evey 30 seconds instead of 10.</li>
</ul>


<h2>v2.22.0</h2>
2023-03-28<br>

<b>Improvements</b>
<ul>
	<li>Support for editing own lines.</li>
	<li>Support copying lines.</li>
	<li>UI: Major improvement including full screen support.</li>
	<li>LandXML: Support loading files containing CircCurve.</li>
	<li>Improved gamepad sensitivity.</li>
	<li>Reload machine calibration after synchronization if it has changed.</li>
	<li>GNSS: Initial support for Trimble CAL files for local site calibration.</li>
	<li>Support for showing points within lines.</li>
</ul>


<h2>v2.21.2</h2>
2023-03-28<br>

<b>Improvements</b>
<ul>
	<li>Stakeout: Support both fixed object and side reference.</li>
</ul>


<h2>v2.21.1</h2>
2023-03-20<br>

<b>Bugfixes</b>
<ul>
	<li>Show auto calibration menu.</li>
	<li>LandXML: Avoid identical points in planFeature polyline.</li>
	<li>LandXML: Fix wrong closed line.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>Load OGL.xml automatically.</li>
	<li>Disable full sync.</li>
	<li>Updated Norwegian translation.</li>
</ul>


<h2>v2.20.10</h2>
2023-03-14<br>

<b>Bugfixes</b>
<ul>
	<li>Avoid potential crash when parsing alignments.</li>
	<li>Fixed bug in Norwegian rotor error message.</li>
	<li>Added compass in GNSS screen.</li>
	<li>Fixed missing slope indications in 2D views.</li>
</ul>


<h2>v2.20.9</h2>
2023-03-06<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed screen selection being stuck in bullseye.</li>
	<li>Avoid a num,ber of crashes during license changes.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>SVAB/SMP: Improve error reporting.</li>
</ul>


<h2>v2.20.8</h2>
2023-02-16<br>

<b>Bugfixes</b>
<ul>
	<li>LandXML: Accept Feature in PlanFeatures.</li>
</ul>


<h2>v2.20.7</h2>
2023-02-08<br>

<b>Improvements</b>
<ul>
	<li>Support new Engcon tilt rotator.</li>
</ul>


<h2>v2.20.6</h2>
2023-02-02<br>

<b>Bugfixes</b>
<ul>
	<li>Limits width of some texts in the menu.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>Increase width of temporary profile to 50 meters.</li>
</ul>


<h2>v2.20.5</h2>
2023-01-31<br>

<b>Bugfixes</b>
<ul>
	<li>GNSS: Fixed startup issues on the AsteRx-U3</li>
	<li>Fixed maps colliding and fighting with horizontal surfaces.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>New: Stakeout point.</li>
	<li>New: Copy line and copy point.</li>
	<li>New: Preliminary sensor test screen.</li>
	<li>New: Geometry info on long-hold in the reference dialog.</li>
	<li>Cloud: Hide sync error when synchronization succeeds.</li>
	<li>Auto-start Makin on Android devices with 7" screens or higher.</li>
	<li>IB-1: firware to v0.8.5 - fixes rare packet loss.</li>
	<li>Improved splash screen.</li>
</ul>


<h2>v2.19.17</h2>
2023-01-20<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed startup issues on the AsteRx-U3</li>
</ul>

<h2>v2.19.16</h2>
2023-01-10<br>

<b>Bugfixes</b>
<ul>
	<li>GNSS: Set elevation mask for Hemisphere GNSS receivers.</li>
	<li>AMD graphics card fix.</li>
</ul>

<h2>v2.19.15</h2>
2023-01-02<br>

<b>Bugfixes</b>
<ul>
	<li>GNSS: Make RNS work for networked AsteRx-U and NR3 receivers.</li>
</ul>

<h2>v2.19.14</h2>
2022-12-22<br>

<b>Bugfixes</b>
<ul>
	<li>Only show project offset on startup or when changing project.</li>
	<li>Show RMS on all GNSS receivers.</li>
</ul>

<h2>v2.19.13</h2>
2022-12-20<br>

<b>Improvements</b>
<ul>
	<li>Inclination firmware update procedure has been improved.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Show labels again.</li>
	<li>AsteRx-U fix error message from receiver when secondary antenna is missing.</li>
</ul>

<h2>v2.19.12</h2>
2022-12-12<br>

<b>Improvements</b>
<ul>
	<li>DXF: Better handling of blocks and arcs.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>TPS: Avoid calculating height when "Rotate machine" is required.</li>
	<li>As-built: Fix missing as-built on MakinWin.</li>
	<li>LandXML: Fix missing points when loading a as-built LandXML-export .</li>
</ul>


<h2>v2.19.11</h2>
2022-11-22<br>

<b>Improvements</b>
<ul>
	<li>Hemisphere VR1000 firmware update implementation</li>
	<li>Hemisphere VR1000 new firmware update v. 6.0Aa05f</li>
	<li>New sensor firmware not requiring license for calibration.</li>
</ul>
<b>Bugfixes</b>
<ul>
	<li>Avoid data loss on network sockets affecting Septentrio GNSS upgrade.</li>
	<li>Fixed crash related to project synchronisation.</li>
	<li>Handle closed lines during stakeout.</li>
	<li>Open the correct manual for Makin' Survey.</li>
	<li>Fix the loss of selected referenses side,height,alert when files are updated.</li>
</ul>


<h2>v2.19.10</h2>
2022-11-10<br>

<b>Bugfixes</b>
<ul>
    <li>DXF: Avoid text disapearing in some files.</li>
</ul>


<h2>v2.19.9</h2>
2022-10-28<br>

<b>Improvement</b>
<ul>
	<li>Speedup changing project if projects contains a lot of geometries.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Handle coordinatesystems better when using GNSS-simulator.</li>
</ul>

<h2>v2.19.8</h2>
2022-10-26<br>

<b>Bugfixes</b>
<ul>
	<li>Avoid crash when editing logpoint name.</li>
	<li>General stability improvements.</li>
</ul>


<h2>v2.19.7</h2>
2022-10-24<br>

<b>Bugfixes</b>
<ul>
	<li>Sensor firmware fix.</li>
</ul>

<h2>v2.19.6</h2>
2022-10-20<br>

<b>Bugfixes</b>
<ul>
	<li>Fix slow framerate caused by DXF-files with many texts.</li>
</ul>


<h2>v2.19.5</h2>
2022-10-17<br>

<b>Bugfixes</b>
<ul>
	<li>Fix handling of large texts (font size).</li>
</ul>


<h2>v2.19.4</h2>
2022-10-12<br>
<b>Improvements</b>
<ul>
	<li>Updated translations.</li>
	<li>Hide "Project Offset" from the menu in 2D.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Pitch/Roll: Fix bug where sensor invert did not actually invert both sensors.</li>
</ul>


<h2>v2.19.3</h2>
2022-09-27<br>
<b>Improvements</b>
<ul>
	<li>Translation updates.</li>
</ul>


<h2>v2.19.2</h2>
2022-09-26<br>

<b>Improvements</b>
<ul>
	<li>New sensor firmware.</li>
	<li>Changed technical password.</li>
</ul>


<h2>v2.19.1</h2>
2022-09-16<br>

<b>Improvements</b>
<ul>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fix network stall after random server disconnects.</li>
</ul>


<h2>v2.19.0</h2>
2022-08-25<br>

<b>Improvements</b>
<ul>
	<li>Battery level indicator in main screen.</li>
	<li>Position DXF text as specified in the file.</li>
	<li>Do not display tilt out of range on cloud.</li>
	<li>Remember as-built selections in the reference list after restart.</li>
	<li>Septentrio: Avoid making the receiver unresponsive after a series of tablet connect/disconnect.</li>
	<li>Properly handle rename of server projects.</li>
	<li>New screen selector.</li>
	<li>Support for Geo PXY files.</li>
	<li>Warn about empty files (0 bytes).</li>
	<li>2D/3D toggle button the all 3D screens.</li>
	<li>System information (name, customer and license) is now available from the menu.</li>
	<li>We now use RMS for GNSS quality indication.</li>
	<li>LandXML: Support breaklines, twisted arc and horizontal arc.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fix handling of realy large texts.</li>
	<li>Avoid "-0.00" on nummeric values.</li>
	<li>Allow userdata to contain special characters.</li>
</ul>


<h2>v2.18.12</h2>
2022-09-14<br>

<b>Bugfixes</b>
<ul>
	<li>Ensure reconnect even if server connection is terminated at random times.</li>
</ul>

<h2>v2.18.11</h2>
2022-08-17<br>

<b>Bugfixes</b>
<ul>
	<li>Further reduce excess as-built synchronization.</li>
</ul>

<h2>v2.18.10</h2>
2022-08-10<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed NTRIP stalling when started up with no Internet on some systems.</li>
</ul>

<h2>v2.18.9</h2>
2022-08-05<br>

<b>Improvements</b>
<ul>
	<li>Avoid excess as-built synchonization.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Make sure to actually store rotor type when changed.</li>
</ul>

<h2>v2.18.8</h2>
2022-07-07<br>

<b>Improvements</b>
<ul>
	<li>Updated french translations.</li>
</ul>

<h2>v2.18.7</h2>
2022-07-01<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed weird layout of releasenotes.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>J1939: Issue address claims for 15 seconds to wake up the other end.</li>
	<li>Allow for future RDNAPTRANS2018 with built-in geoid.</li>
</ul>

<h2>v2.18.6</h2>
2022-06-28<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed loss of terrain layers in 2.18.5</li>
</ul>

<h2>v2.18.5</h2>
2022-06-27<br>

<b>Improvements</b>
<ul>
	<li>Load large projects faster.</li>
	<li>Better responsiveness when changing references.</li>
	<li>Disable bluetooth on VR1000.</li>
	<li>Improve framerate by about 10%.</li>
</ul>


<h2>v2.18.4</h2>
2022-06-18<br>

<b>Bugfixes</b>
<ul>
	<li>DXF: Fixed closed polylines not loading correctly.</li>
	<li>VR1000: Added missing UHF frequency setup.</li>
	<li>VR1000: Enable all correction sources.</li>
	<li>NTRIP: Improve stability and reconnects.</li>
	<li>J1939: Disable reading rotor data as old sensor data.</li>
	<li>GNSS: Bring back position dots in the status screen.</li>
</ul>

<h2>v2.18.3</h2>
2022-05-31<br>

<b>Bugfixes</b>
<ul>
    <li>Fix slowdown when changing screen.</li>
	<li>Slightly improve menu responsiveness.</li>
	<li>VR1000: Small protocol fix as weell as more diagnostics output.</li>
</ul>


<h2>v2.18.2</h2>
2022-05-23<br>

<b>Bugfixes</b>
<ul>
    <li>Stability improvements.</li>
</ul>


<h2>v2.18.1</h2>
2022-05-17<br>

<b>Bugfixes</b>
<ul>	
	<li>Fix lines not being visible through the plane.</li>
</ul>	


<h2>v2.18.0</h2>
2022-05-06-<br>

<b>Improvements</b>
<ul>
	<li>Allow machine to be transparent.</li>
	<li>Better stakeout line visibility.</li>
	<li>Boom0 is now called "City Boom".</li>
	<li>Added coordinatesystems for Belgium.</li>
	<li>GNSS calibration improvements.</li>
	<li>Show northing-eathing in screen again.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fixed minor SNIP issues.</li>
	<li>Improve NTRIP client stability.</li>
	<li>Store last logline point if new line is selected.</li>
</ul>


<h2>v2.17.2</h2>
2022-04-12<br>

<b>Improvements</b>
<ul>
	<li>VR1000: Setup Base ID.</li>
</ul>

<b>Bugfixes</b>
<ul>
    <li>Refine ARM/x86 platform detection.</li>
    <li>Do not crash if Android fine position is not allowed.</li>
</ul>


<h2>v2.17.1</h2>
2022-04-06<br>

<b>Improvements</b>
<ul>
	<li>Reset log offset to 0.0 when changing code.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>General startup stability improvements.</li>
	<li>Fix VR1000 radio setup to setup UHF correctly.</li>
</ul>


<h2>v2.17.0</h2>
2022-03-24<br>

<b>Improvements</b>
<ul>
	<li>Sorting/grouping of as-built.</li>
	<li>Improve support for SNIP NTRIP caster.</li>
	<li>Improve DXF text handling.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Allow access VR1000 to web ui from cloud and Makin'3D.</li>
	<li>Fix missing project offset on restart.</li>
</ul>


<h2>v2.16.0</h2>
2022-02-15<br>

<b>Improvements</b>
<ul>
	<li>GNSS: New trace heading function.</li>
	<li>Age of correction error after 10 sek without corrections.</li>
	<li>Added use of RMS-values instead of DOP and CQ.</li>
	<li>Added extra attributes to as-built.</li>
</ul>


<h2>v2.15.6</h2>
2022-01-17<br>

<b>Bugfixes</b>
<ul>
	<li>Fix application freeze when dealing with huge circle diameters.</li>
</ul>


<h2>v2.15.5</h2>
2022-01-7<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed project not being saved correctly.</li>
</ul>

<h2>v2.15.4</h2>
2022-01-03<br>

<b>Bugfixes</b>
<ul>
	<li>Deleted local projects now stay deleted after restart.</li>
</ul>

<h2>v2.15.3</h2>
2021-12-21<br>

<b>Improvements</b>
<ul>
	<li>Support listing of mountpoints for all receivers.</li>
	<li>The SNIP NTRIP caster now works.</li>
	<li>Increase project offset limit to +-1 meter.</li>
	<li>Fix audio output using a lot of CPU time.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fix problem with AsteRx-U update from v4.2.2
	<li>Fix potential crash when listen available projects to load.</li>
</ul>


<h2>v2.15.1</h2>
2021-12-02<br>

<b>New features</b>
<ul>
	<li>Users can now lock the current side and height reference using the small padlock.</li>
	<li>GNSS firmware can now be updated by users.</li>
	<li>Zero height files (files with every geometry in H=0.0) now follow map.
</ul>

<b>Improvements</b>
<ul>
	<li>Issue an error if corrections are missing more than 10 seconds.</li>
	<li>Avoid VR1000 coasting too long giving a false good quality indication.</li>
	<li>Removed northing and easting from most screens.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Improved UTS and single GNSS precision.</li>
</ul>


<h2>v2.14.6</h2>
2021-11-18<br>

<b>Bugfixes</b>
<ul>
	<li>Fix complete lockup of the software when loggin points back-to-back.</li>
</ul>


<h2>v2.14.5</h2>
2021-11-11<br>

<b>Bugfixes</b>
<ul>
	<li>Fix logpoints not being shown at all for some users.</li>
	<li>Improve MakinWin on system with AMD graphics chips.</li>
	<li>LandXML: Do not default to black for non-existing color.</li>
	<li>Limit number of decimals for geometry info.</li>
</ul>


<h2>v2.14.4</h2>
2021-10-28<br>

<b>Improvements</b>
<ul>
	<li>Multiple as-built improvements.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fix downloading background maps.</li>
	<li>Fix logpoint numbering when logging back-to-back.</li>
	<li>Fix problem when creating profile with identical points.</li>
</ul>


<h2>v2.14.0</h2>
2021-10-13<br>

<b>Improvements</b>
<ul>
	<li>Allow setting bluetooth by the operator.</li>
	<li>GNSS: Seperate default IP-address for each application.</li>
	<li>Septentrio: Support update of both failsafe and main firmware.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Bluetooth stabillity improvmenets.</li>
</ul>


<h2>v2.13.18</h2>
2021-10-07<br>

<b>Improvements</b>
<ul>
	<li>More TPS improvements.</li>
	<li>Support sensor firmware recovery in case of failures.</li>
</ul>

<h2>v2.13.17</h2>
2021-09-29<br>

<b>Bugfixes</b>
<ul>
	<li>TPS improvements</li>
</ul>

<h2>v2.13.16</h2>
2021-09-27<br>

<b>Bugfixes</b>
<ul>
	<li>Removed debug menu from technicians.</li>
</ul>

<h2>v2.13.15</h2>
2021-09-13<br>

<b>Bugfixes</b>
<ul>
	<li>Fixes that dual boom machines do not load single boom machines.</li>
	<li>Bullseye landscape view now with top view.</li>
</ul>

<h2>v2.13.11</h2>
2021-08-16<br>

<b>Bugfixes</b>
<ul>
	<li>Avoid auto selecting GNSS simulator if license is missing.</li>
</ul>


<h2>v2.13.10</h2>
2021-08-11<br>

<b>Improvments</b>
<ul>
	<li>Pole height max changed from 15m to 500m.</li>
	<li>Make profile be across tool direction in 1D.</li>
	<li>Added new fw for sensors.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Small stability fixes.</li>
</ul>


<h2>v2.13.7</h2>
2021-07-08<br>

<b>Improvments</b>
<ul>
	<li>Improve memory profile.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Improve handling of masformed KOF-files.</li>
	<li>Avoid rare crash during change of screen.</li>
	<li>Avoid crash when exiting GNSS configuration website.</li>
	<li>Fix wrong number of decimals when entering UHF frequency and calibration lengths.</li>
</ul>


<h2>v2.13.6</h2>
2021-07-02<br>

<b>Bugfixes</b>
<ul>
	<li>Minor bugfixes.</li>
</ul>


<h2>v2.13.4</h2>
2021-07-01<br>

<b>Improvmenets</b>
<ul>
	<li>Disallow float RTK for calculations.</li>
</ul>


<h2>v2.13.3</h2>
2021-07-01<br>

<b>Bugfixes</b>
<ul>
	<li>Minor bugfixes.</li>
</ul>


<h2>v2.13.2</h2>
2021-06-22<br>

<b>Improvements</b>
<ul>
	<li>Automatically load a licenced app.</li>
	<li>Improve sensor performance slightly.</li>
</ul>


<b>Bugfixes</b>
<ul>
	<li<Fixed wrong order of NEH when adding own points.</li>
	<li>Fix GNSS-receiver IP-adress input sometimes cutting off part of the text.</li>
	<li>Make +- work when setting vertical offset.</li>
	<li>Fixed a number of stabillity issues.</li>
</ul>


<h2>v2.13.1</h2>
2021-06-14<br>

<b>Improvements</b>
<ul>
	<li>Updated Norwegian and Dutch translations.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fixed a crash related to rotating the tablet screen.</li>
</ul>

<h2>v2.13.0</h2>
2021-06-11<br>

<b>New features</b>
<ul>
	<li>New project offset function.</li>
	<li>New Lock reference function.</li>
	<li>Free navigation of camera. Inspect anywhere in the terrain.</li>
	<li>Allow user projects to be deleted in the "open project" list.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>Added CQ in as-built data.</li>
	<li>Always use NEH display format in 3D.</li>
	<li>Do not translate "Language" in the menu.</li>
	<li>Editing points now show correct NEH/XYZ field labels.</li>
	<li>Fixed crazy plane visualization when changing heading +-180 degrees.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Interface box firmware updated with CAN-bus handling improvements.</li>
	<li>Fixed crash after Android permission checks.</li>
	<li>Fixed a number of startup stability issues.</li>

<h2>v2.12.12</h2>
2021-06-16<br>

<b>Improvements</b>
<ul>
	<li>Sensor calibration improvements.</li>
	<li>Updated sensor firmware.</li>
</ul>


<h2>v2.12.11</h2>
2021-06-02<br>

<b>Bugfixes</b>
<ul>
	<li>Fix CQ sometimes being just 0.0.</li>
</ul>


<h2>v2.12.10</h2>
2021-05-31<br>

<b>Bugfixes</b>
<ul>
	<li>Fix pointcode history not containing local pointcodes after restart.</li>
</ul>


<h2>v2.12.9</h2>
2021-05-20<br>

<b>Bugfixes</b>
<ul>
	<li>Fix list of coordinatsystems for local projects.</li>
	<li>Fix Trimble UTS support.</li>
	<li>Fix pointcode history not containing local pointcodes after restart.</li>
	<li>Improve handling of userdata sync.</li>
	<li>Improve "Force RTK".</li>
	<li>Avoid constant display of "Loading project...".</li>
	<li>Avoid unintented shutdown during first Makin'3D startup.</li>
	<li>Set sound to be off by default.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>Display bucket corner heights in current unit.</li>
</ul>


<h2>v2.12.8</h2>
2021-04-28<br>

<b>Bugfixes</b>
<ul>
	<li>Fix error in bullseye visualization.</li>
</ul>


<h2>v2.12.7</h2>
2021-04-23<br>

<b>Bugfixes</b>
<ul>
	<li>Avoid erratic behavior when sensors have very old firmware.</li>
</ul>


<h2>v2.12.6</h2>
2021-04-19<br>

<b>Bugfixes</b>
<ul>
	<li>Multiple stability fixes.</li>
	<li>Make direction indicator follow plane</li>
</ul>

<h2>v2.12.5</h2>
2021-04-15<br>

<b>Improvments</b>
<ul>
	<li>Added disclaimer.</li>
    <li>Added bucket corner visualization.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fixed wrong positioning of maps in some cases.</li>
	<li>DXF: Improve handling of invalid files.</li>
</ul>

<h2>v2.12.0</h2>
2021-03-24<br>

<b>Improvments</b>
<ul>
	<li>Added compass visualization.</li>
	<li>Added firmware update AsteRx-U and NR3 from Makin'3D.</li>
	<li>Added new calibration for sensors supporting it.</li>
	<li>Added lock reference function.</li>
	<li>Added automatic numbering of logpoints.</li>
</ul>

<h2>v2.11.13</h2>
2021-03-17<br>

<b>Bugfixes</b>
<ul>
	<li>Improve GNSS fix stabillity.</li>
	<li>Position maps at correct height at startup.</li>
	<li>Restore temporary profile parameters at startup.</li>
</ul>

<h2>v2.11.12</h2>
2021-03-03<br>

<b>Bugfixes</b>
<ul>
	<li>Fix text outlines looking horrible.</li>
	<li>Do additional pointcode charset UTF-8 fixup.</li>
</ul>

<h2>v2.11.11</h2>
2021-02-22<br>

<b>Improvments</b>
<ul>
	<li>Added support for new sensor.</li>
	<li>Technical password has been changed.</li>
</ul>

<h2>v2.11.10</h2>
2021-01-21<br>

<b>Bugfixes</b>
<ul>
    <li>Remote support now connects at first connect.</li>
	<li>Avoid crash when rotating tablet during remote support.</li>
	<li>Fixed potential sync up problem.</li>
</ul>

<b>Improvments</b>
<ul>
	<li>Monitor GNSS-receiver CPU usage.</li>
	<li>Updated NO and SE translations.</li>
</ul>


<h2>v2.11.9</h2>
2021-01-07<br>

<b>Bugfixes</b>
<ul>
    <li>Added cutting edge visualization on maps.</li>
	<li>Avoid posible crash after editing point.</li>
</ul>

<b>Improvments</b>
<ul>
	<li>Display cuting edge on maps.</li>
	<li>Display error if periodic sensors data stalls.</li>
	<li>Use NEH for Sweden.</li>
	<li>Sensor stability improvements.</li>
	<li>Only enable GNSS improvmenets for AsteRx-U >= 4.6.0.</li>
</ul>


<h2>v2.11.8</h2>
2020-12-14<br>

<b>Bugfixes</b>
<ul>
    <li>Added bugfixes from 2.11.3b.</li>
</ul>


<h2>v2.11.7</h2>
2020-12-11<br>

<b>Bugfixes</b>
<ul>
    <li>Avoid possible slow heading.</li>
</ul>


<h2>v2.11.6</h2>
2020-12-10<br>

<b>Bugfixes</b>
<ul>
	<li>Improve GNSS responsiveness.</li>
</ul>


<h2>v2.11.3b</h2>
2020-12-14<br>

<b>Bugfixes</b>
<ul>
	<li>Bring back beep on yellow and red band.</li>
	<li>Avoid alignment lines being placed in height 0.0</li>
	<li>Do not use height offset for logpoint references.</li>
</ul>


<h2>v2.11.3a</h2>
2020-12-09<br>

<b>Bugfixes</b>
<ul>
	<li>Ensure correct sensors readings during calibration.</li>
</ul>


<h2>v2.11.3</h2>
2020-12-07<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed cutting edge indication in topview.</li>
	<li>Added support for additional sensor version.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>Added left- and rear-view to topview screen.</li>
</ul>


<h2>v2.11.2</h2>
2020-11-27<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed GNSS heading issue.</li>
	<li>Fixed wrongly sensor initialization notification.</li>
</ul>


<h2>v2.11.1</h2>
2020-11-24<br>

<b>Bugfixes</b>
<ul>
	<li>Added missing "point from tool" button when creating own line.</li>
	<li>Fixed error in display of sensor orientation.</li>
</ul

<b>Improvements</b>
<ul>
	<li>Improve stabillity of GNSS remote support - hopefully solving occasional http glitches.</li>
</ul>

<h2>v2.11.0</h2>
2020-11-12<br>

<b>Improvements</b>
<ul>
	<li>Show basic information when longholding logpoints.</li>
	<li>Store 20 minuttes of detailed systemlog.</li>
	<li>Added better support for large file transfers from GNSS receiver.</li>
	<li>Support CAT-branded Rototilt.</li>
	<li>Report more detailed errors after file sync.</li>
	<li>Check for and enforce logpoint name uniqueness.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Avoid crashes during unstable or very slow internet connections.</li>
	<li>Avoid disabling height calculation during project reload if nothing has changed.</li>
	<li>Fix heavy pixelation of map in topview.</li>
	<li>Use TP for line creation as well as points.</li>
	<li>Issue error if a sensor has an unknown orientation.</li>
</ul>


<h2>v2.10.14</h2>
2020-11-05<br>

<b>Improvements</b>
<ul>
	<li>Support GH88 geoid.</li>
</ul>


<h2>v2.10.11</h2>
2020-11-04<br>

<b>Improvements</b>
<ul>
	<li>J1939: Added support for CAT branded rototilt.</li>
	<li>Support zeroing plane using external button.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fix problems with minimized reference dialog.</li>
</ul>


<h2>v2.10.10</h2>
2020-10-15<br>

<b>Bugfixes</b>
<ul>
	<li>J1939: Transmit correct rototil address claim.</li>
</ul>

<h2>v2.10.9</h2>
2020-10-1<br>

<b>Bugfixes</b>
<ul>
	<li>Multiple stability fixes.</li>
</ul>

<h2>v2.10.8</h2>
2020-09-29<br>

<b>Bugfixes</b>
<ul>
	<li>Multiple stability fixes.</li>
</ul>

<h2>v2.10.7</h2>
2020-09-24<br>

<b>Bugfixes</b>
<ul>
	<li>Use plane button as 0.0 again.</li>
	<li>Fixed crash during load of Stavsberg Skole.</li>
	<li>Multiple stability fixes.</li>
</ul>

<h2>v2.10.6</h2>
2020-09-23<br>

<b>Bugfixes</b>
<ul>
	<li>Avoid crash when geometry names are empty.</li>
	<li>Hide menu when zeroing plane.</li>
	<li>Fix camera zoom during antenna calibration.</li>
	<li>Fix polyline sidedistance visualization.</li>
</ul>

<h2>v2.10.5</h2>
2020-09-21<br>

<b>Improvments</b>
<ul>
	<li>J1939: transmit address claim at startup.</li>
	<li>Monitor ethernet communication details.</li>
</ul>


<h2>v2.10.4</h2>
2020-09-07<br>

<b>Improvments</b>
<ul>
	<li>Improve text outline appearence.</li>
	<li>Detect ethernet tx/rx errors.</li>
</ul>


<h2>v2.10.3</h2>
2020-08-31<br>

<b>Improvments</b>
<ul>
	<li>Reference dialog improvements.</li>
	<li>Topview added for bullseye screen.</li>
	<li>Enhanced Stakeout application loading.</li>
	<li>Better cutting edge visibility for top view.</li>
	<li>Translations added.</li>
	<li>Improved GNSS auto calibration presentation.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fix Trimble UTS</li>
	<li>Fix freeze when loading models in non-UTF8 format.</li>
	<li>Fix freeze when working in high altitudes.</li>
</ul>


<h2>v2.10.1</h2>
2020-08-24<br>

<b>Bugfixes</b>
<ul>
	<li>Fixed lockup-issue with terrain at high altitudes.</li>
</ul>


<h2>v2.10.0</h2>
2020-08-21<br>

<b>Improvments</b>
<ul>
	<li>Added new 1D/2D profile.</li>
	<li>Show tool cuts on maps.</li>
	<li>Allow toggling "dark mode" off.</li>
	<li>Added bullseye for rover.</li>
	<li>LandXML: Alignment colors for Gemini and Trimble added.</li>
	<li>Added transparent surfaces option.</li>
	<li>Improve label display performance.v
	<li>Improce magnetic compas calibration.</li>
	<li>Hide machine in topview.</li>
	<li>Make pointcode history be the last 10 selected codes.</li>
	<li>Display bucket width as a thich line in topview.</li>
	<li>Open project selection during startup if no project has been selected.</li>
	<li>Added SWEREF99 TM coordinate system + geoids SWEN08_RH2000, SWEN08_RH70, SWEN17_RH2000, SWEN17_RH70.</li>
	<li>Added Swedish RT90 coordinate systems.</li>
	<li>We now show pole/bucket size with 2 decimals on the main icon.</li>
	<li>Always show cutlines at the mapheight for better positioning outside model.</li>
	<li>Added "Transparent surfaces" menu./li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fixed graphical issues on Mesa2 rover tablet.</li>
	<li>Fix tool calibration dialog zoom.</li>
	<li>Bring back display of points on Windows.</li>
	<li>Bring back maps on Windows.</li>
	<li>Removed vertical offset when drawing horizontal part of height line.</li>
	<li>Fix the funny behaving ± button in the point edit dialog.</li>
	<li>Fix selection being difficult in top-view.</li>
</ul>


<h2>v2.9.9</h2>
2020-08-13<br>
<b>Bugfix</b>
<ul>
	<li>Fix cases of files from the server not being downloaded./li>
</ul>


<h2>v2.9.8</h2>
2020-07-06<br>
<b>Bugfix</b>
<ul>
	<li>Ensure no GNSS is selected for 1D and 2D systems.</li>
	<li>Fixed a number of potential crashes.</li>
</ul>


<h2>v2.9.7</h2>
2020-05-25<br>
<b>Bugfix</b>
<ul>
	<li>Fixed synchronization problems.</li>
	<li>Show coordinates as NEH for Norwegian languages.</li>
</ul>


<h2>v2.9.6</h2>
2020-05-11<br>
<b>Bugfix</b>
<ul>
	<li>Correct S34 coordinate system.</li>
</ul>


<h2>v2.9.5</h2>
2020-05-07<br>
<b>Bugfix</b>
<ul>
	<li>Avoid constant transformatin errors in some cases after startup.</li>
	<li>Remove track debug output in the logs.</li>
</ul>


<h2>v2.9.4</h2>
2020-05-04<br>
<b>Bugfix</b>
<ul>
	<li>Fixed rendering of points on Windows.</li>
</ul>


<h2>v2.9.3</h2>
2020-04-29<br>
<b>Improvements</b>
<ul>
	<li>Select Meters as default length unit when starting up application for the first time.</li>
	<li>Improved topview.</li>
	<li>Improve error reporting when GNSS position is missing.</li>
</ul>

<b>Bugfix</b>
<ul>
	<li>Fix heading of tracks not following machine driving direction.</li>
	<li>Do not report of coordinate system transform problem when diconnecting aux antenna.</li>
	<li>Removed System34 coordinate system height error.</li>
</ul>


<h2>v2.9.2</h2>
2020-04-20<br>
<b>Bugfix</b>
<ul>
	<li>Fix septentrio GNSS not getting fix after reboot.</li>
</ul>

<h2>v2.9.1</h2>
2020-04-19<br>
<b>Improvements</b>
<ul>
	<li>Disable SBAS and Standalone GNSS PVT-mode. </li>
</ul>

<b>Bugfix</b>
<ul>
	<li>Avoid self-rotation issue with certain sensor firmware versions.</li>
	<li>Disable GNSS height responsiveness improvements because of rare GNSS quality sideeffects.</li>
	<li>Avoid no GNSS position after first startup after v2.9.x update.</li>
</ul>


<h2>v2.9.0</h2>
2020-04-16<br>
<b>Improvements</b>
<ul>
	<li>Support saving and editing own profiles.</li>
	<li>Improve GNSS height responsiveness.</li>
	<li>Improve sensor firmware update procedure.</li>
	<li>Updated sensor firmware for improved performance and stability.</li>
	<li>Store Septentrio IP addres per. application.</li>
	<li>Dim menu items during fx. GNSS/NTRIP setup.</li>
	<li>Show the age of RTK corrections on the GNSS screen.</li>
	<li>Show bucket width and pole kength on tool-icon.</li>
</ul>

<b>Bugfix</b>
<ul>
	<li>Filter project not on server more correctly.</li>
	<li>Avoid losing your points and lines because of file synchronization.</li>
</ul>


<h2>v2.8.11</h2>
2020-03-28<br>
<b>Bugfix</b>
<ul>
    <li>Fixed minor issue with load/store height.</li>
	<li>Fixed minor bug during project load.</li>
</ul>

<b>Improvements</b>
<ul>
    <li>Improve firmware loading on some newer Android phones.</li>
	<li>When creating own profile do not ask for line of already selected.</li>
</ul>


<h2>v2.8.10</h2>
2020-03-19<br>
<b>Bugfix</b>
<ul>
    <li>Improve GNSS initialization stability.</li>
</ul>


<h2>v2.8.5</h2>
2020-03-10<br>
<b>Improvements</b>
<ul>
	<li>Improved handling of heading from GNSS.</li>
</ul>

<h2>v2.8.4</h2>
2020-03-10<br>
<b>Improvements</b>
<ul>
	<li>Improved handling of danish national letters.</li>
</ul>

<b>Bugfix</b>
<ul>
	<li>Position maps correctly when offset is not 0.0.</li>
	<li>Make storing own points work for projects containing danish national letters.</li>
</ul>


<h2>v2.8.3</h2>
2020-03-2<br>
<b>Improvements</b>
<ul>
	<li>New application: Makin Stakeout.</li>
	<li>Improve loading of large projects.</li>
	<li>Improve performance of offset adjustments.</li>
	<li>Support sensor firmware update.</li>
	<li>New bucket geometry.</li>
	<li>Improve sensor connectivity at startup.</li>
	<li>Parameter sequence in tool menu changed.</li>
	<li>Improve GNSS handling when no project is loaded.</li>
	<li>Improved the appearence of the profile dialog.</li>
	<li>Graphical improvements to the reference dialog.</li>
	<li>Show warning to the operator if the system crashes running a large project.</li>
	<li>LandXML: Ignore invisible faces.</li>
	<li>DXF: Ignore AcDbFaceRecord vertex.</li>
</ul>

<b>Bugfix</b>
<ul>
	<li>Make switching between NTRIP and UHF more reliable.</li>
	<li>Fixed error during line creation.</li>
	<li>Fixed the system unable to reload projects ending in ")".</li>
	<li>Fixed a number of potential crashes.</li>
	<li>Fixed a very rare triangle miscalculation.</li>
	<li>Improve sensor readings.</li>
	<li>Fixed rare file sync bug for files of x*1600 bytes</li>
	<li>Fixed screen lockup during sensor attachment.</li>
	<li>Avoid possible crash when adding own pointcodes.</li>
</ul>


<h2>v2.7.6</h2>
2019-11-29<br>
<b>Improvements</b>
<ul>
	<li>Stakeout application.</li>
	<li>Added 2D top views.</li>
	<li>Allow using built-in GNSS receiver.</li>
	<li>Support some gamepads on Android.</li>
	<li>Only allow minimize of notifications for technichians.</li>
	<li>Added a warning if the project exceeds a certain size.</li>
	<li>Added CQ display for receivers that supports it.</li>
	<li>Send attached sensors and hardware to the server.</li>
	<li>Store plane settings for each project.</li>
	<li>Select all geometry when clicking the column icons in the reference dialog.</li>
</ul>

<b>Bugfix</b>
<ul>
	<li>Improved sensor communication stability.</li>
	<li>Avoid hiding notifications under menu in horizontal mode.</li>
	<li>Laser sensor stability improvements.</li>
	<li>Fix Trimble UTS coordinate ordering.</li>
	<li>Fix Trimble UTS initial connection not working.</li>
	<li>Fix reference selection not working.</li>
	<li>Make MakinWin run on more systems.</li>
	<li>Improve CANOpen node initialization robustness.</li>
	<li>Hide NTRIP settings when GNSS disconnected.</li>
	<li>Keep showing logpoints on windows even though they  are not saved.</li>
	<li>Fix rare case of wrongly calculated sidereference after offset change.</li>
</ul>

<h2>v2.6.2</h2>
2019-10-17<br>
<b>Improvements</b>
<ul>
	<li>Update tolerance translation when changing language.</li>
	<li>Update Norwegian translations.</li>
	<li>DXF: Skip \0 control sequence in texts.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>LandXML: Ignore unhandled elements in PlanFeature.</li>
	<li>Avoid bug during parsing of unexpected NMEA msessages.</li>
	<li>Reconnect to GNSS after disconnect or connection failure.</li>
</ul>

<h2>v2.6.1</h2>
2019-09-19<br>
<b>Improvements</b>
<ul>
	<li>Support using F1 to F4 as external key.</li>
</ul>

<h2>v2.6.0</h2>
2019-08-28<br>
<b>Improvements</b>
<ul>
	<li>Update text in 3D when editing line name.</li>
	<li>Scroll to point, line and profile after creation.</li>
	<li>Skip showing quickkeys and statusbar when pressing external keyboard.</li>
	<li>Added "time left" indication on notifications.</li>
	<li>Show project logpoints in the reference dialog.</li>
	<li>Improved geometry selection mechanism.cir</li>
	<li>Decreased the text label bounce amount.</li>
	<li>Added +- calculator functionality when editing own points.</li>
	<li>Open new project automatically after creation.</li>
	<li>Added logpoint edit - delta height and name.</li>
	<li>Allow creation of points and lines when things are selected - ask for points if needed.</li>
	<li>Avoid duplicate name when creating line.</li>
	<li>Support coordinate system definition on server.</li>
	<li>Moved laser sensor zero be at the connector end of the sensor.</li>
	<li>Initial support for Hemisphere V102.</li>
	<li>Increase font size of cut slope indications.</li>
	<li>Do a faster recovery of network failures and cable disconnects.</li>
	<li>Improve logpoint auto numbering to include a project machine number.</li>
	<li>Notify the user if the system is in airplane mode.</li>
</ul>

<b>Performance</b>
<ul>
	<li>Sidedistance calculation improvment on long lines.</li>
	<li>Improve performance of thousands of logpoints.</li>
	<li>Improve graphics support for certain drivers on Windows.</li>
	<li>Avoid slow graphics after showing thousands of text labels.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Handle Engcon tilt rotator errors again.</li>
	<li>Remove weird log point name when no project is selected.</li>
	<li>myproject: Only test lines for duplicate line name.</li>
	<li>Remove the stray blue top-left text cursor.</li>
	<li>Fix bucket name shown as "nan" when no bucket is selected.</li>
	<li>Fix a bunch of point code related bugs.</li>
	<li>Make sure that we can delete created profiles.</li>
	<li>Fix some weird behavior whene deleting own geometry.</li>
	<li>Fixed a bug where the system would lockup during network disconnect.</li>
</ul>


<h2>v2.5.6</h2>
2019-07-11<br>
<b>Bugfixes</b>
<ul>
	<li>Fallback to dual antenna, if no capability is received.</li>
	<li>Avoid eternal timeout when loosing connection to the GNSS receiver.</li>
</ul>

<h2>v2.5.5</h2>
2019-07-8<br>
<b>Bugfixes</b>
<ul>
	<li>Improve laser sensor initialization stability.</li>
</ul>

<h2>v2.5.4</h2>
2019-07-5<br>
<b>Bugfixes</b>
<ul>
	<li>Further fix IB-1 lockup when there is trafic on the either CAN-bus during startup.</li>
</ul>

<h2>v2.5.3</h2>
2019-07-4<br>
<b>Bugfixes</b>
<ul>
	<li>Fix IB-1 lockup when there is trafic on the either CAN-bus during startup.</li>
</ul>

<h2>v2.5.2</h2>
2019-07-3<br>
<b>Improvements</b>
<ul>
	<li>Do not add artificial noise when using the GNSS simulator.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Avoid loosing selection when fx. selecting project to open.</li>
	<li>Fix the light slowdown of the system appearing since 2.4.5.</li>
</ul>


<h2>v2.5.1</h2>
2019-07-2<br>
<b>Improvements</b>
<ul>
	<li>Increase tilt sensor warning delay to 10 seconds.</li>
	<li>Improved circle calculation for tracker.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Don't report "rotate machine" when having a dual antenna GNSS receiver.</li>
	<li>Fix point logging for experimental application.</li>
</ul>


<h2>v2.5.0</h2>
2019-06-24<br>
<b>Improvements</b>
<ul>
	<li>Disable edit functionality on profiles in the reference dialog.</li>
	<li>Make logpoint notificating remove "unable to log point2 notification.</li>
	<li>Store maps cachefiles in multiple directory levels.</li>
	<li>Update GNSS menu when configuration changes.</li>
	<li>Added coordinate system for Gardermosen.</li>
	<li>Added coordinate system for Lithuania LKS94.</li>
	<li>Show coupler type under under coupler name.</li>
	<li>Added bounds for Danish local system so they can not be seen outside DK.</li>
	<li>Show memory usage in technical mode.</li>
	<li>Make point logging in local projects work.</li>
	<li>Added grouping of pointcodes.</li>
	<li>Hide gnss specific menu items if GNSS is not enabled.</li>
	<li>Hide GNSS menu items when not having 3D License.</li>
	<li>Read trimbleCADProperties color.</li>
	<li>Added GNSS Simulator Jog function.</li>
	<li>Add jump to side reference button in GNSS Simulator.</li>
	<li>Added 1mm default noise on the simulator.</li>
	<li>Handle long menu titles and values overlapping.</li>
	<li>Accept 5 sattelites as being and ok position.</li>
	<li>Use the overall worst satcount and DOP when assessing GNSS quality.</li>
	<li>Added setting to always show quickkeys.</li>
	<li>Show tilt out-of-range after 3 seconds.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Avoid loosing logpoint during offline periods.</li>
	<li>Make MakinWin work when username contain national characters.</li>
	<li>Make maps follow to height of the plane.</li>
	<li>Ensure that profile along line also works when offset != 0.0.</li>
	<li>Collate the two GNSS positions correctly to avoid antenna differences during rotation.</li>
	<li>Avoid colored  "ghost" profiles laing around after creating profile.</li>
	<li>Always set Septentrio DifCorrUsage - this makes UHF<->NTRIP work again.</li>
	<li>Fix bucket-select and calibration screen looking weird in landscape.</li>
	<li>Avoid "Loading project" not going away even if the project has finished loading.</li>
	<li>Do not allow minimizing line creating notification.</li>
	<li>Avoid crash when changing screen using VNC.</li>
	<li>Fix height error when editing points while offset != 0.0.</li>
	<li>Avoid flickering logpoints at every project reload.</li>
	<li>Fix unknown coordinate system error during startup.</li>
</ul>


<h2>v2.4.5</h2>
2019-05-22<br>
<b>Improvements</b>
<ul>
	<li>Handling of very curved roads.</li>
	<li>Improved handling of LandXML exported from Gemini.</li>
	<li>General stability improvements.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Improved clothoid calculation.</li>
	<li>Fix crash when displaying logged points on ARM phones.</li>
</ul>


<h2>v2.4.4</h2>
2019-03-29<br>
<b>Improvements</b>
<ul>
	<li>Centerline color added.</li>
	<li>Warning if centerline tangent cannot be calculated.<li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Improved clothoid calculation.</li>
	<li>Fix handling of multiple centerlines.</li>
</ul>


<h2>v2.4.3</h2>
2019-03-25<br>
<b>Bugfixes</b>
<ul>
	<li>Fix missing file sync if no project is loaded.</li>
	<li>Fix GNSS antenna calibration bug.</li>
	<li>Avoid crashing when selecting files/folders containing errors.</li>
</ul>


<h2>v2.4.2</h2>
2019-03-18<br>
<b>Bugfixes</b>
<ul>
	<li>Fix application freeze during remote support.</li>
	<li>Fix deletion of pointcodes.</li>
</ul>


<h2>v2.4.1</h2>
2019-03-11<br>
<b>Improvements</b>
<ul>
	<li>Norwegian and Danish translation.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fixed filter in single project download.</li>
</ul>


<h2>v2.4.0</h2>
2019-02-25<br>
<b>Improvements</b>
<ul>
	<li>Support for single project download.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fixed some crashes in the map handling.</li>
	<li>Fixed some memory leaks/errors.</li>
</ul>


<h2>v2.3.5</h2>
2019-02-22<br>
<b>Improvements</b>
<ul>
	<li>Further improve communication stability.</li>
	<li>Allow calculations without GNSS.</li>
</ul>


<h2>v2.3.4</h2>
2019-02-19<br>
<b>Improvements</b>
<ul>
	<li>Improve communication stability.</li>
</ul>


<h2>v2.3.3</h2>
2019-02-14<br>
<b>Bugfixes</b>
<ul>
	<li>Fix some memory leaks.</li>
</ul>


<h2>v2.3.2</h2>
2019-01-28<br>
<b>Bugfixes</b>
<ul>
	<li>Fix crash related to empty geometries.</li>
</ul>


<h2>v2.3.1</h2>
2019-01-24<br>
<b>Bugfixes</b>
<ul>
	<li>Avoid collapsing reference tree when project changes.</li>
</ul>


<h2>v2.3.0</h2>
2019-01-14<br>
<b>New features</b>
<ul>
	<li>Labels in 3D.</li>
</ul>

<b>Improvements</b>
<ul>
	<li>LandXML handling improvements.</li>
	<li>Show file issues in the reference dialog.</li>
	<li>Faster DXF loading.</li>
	<li>Make geometry semi-transparent when the 3D-view comes close.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fixed issue where height/side/warning is not loaded correctly.</li>
	<li>Fixed wrong calculation of total points/lines/surfaces in some projects.</li>
	<li>Fix dimming of label when selecting geometry.</li>
	<li>Fixed crash after many screen changes.</li>
</ul>


<h2>v2.2.3</h2>
2018-12-11<br>
<b>Improvements</b>
<ul>
	<li>Always accept coordinatesystems without predefined bounds.</li>
	<li>Avoid "calculation unavailable" popping up sometimes.</li>
</ul>

<b>Bugfixes</b>
<ul>
	<li>Fixed "profile from line" not removing geometry correctly.</li>
	<li>Fix error and warning not being sent when reconnecting to server.</li>
	<li>Make licensing work on some ARM-devices.</li>
</ul>


<h2>v2.2.2</h2>
2018-11-29<br>
<b>Improvements</b>
<ul>
<li>Shrink 3D text a bit.</li>
<li>Show which files is currently being processed.</li>
<li>Added hiding 3D texts in references.</li>
</ul>

<b>Bugfixes</b>
<ul>
<li>Fix handling of DXF arcs and circles.</li>
<li>Strip DXF text control characters.</li>
<li>Fix issues where 3D selection could differ from reference dialog selection.</li>
</ul>


<h2>v2.2.1</h2>
2018-11-22<br>
<b>Bugfixes</b>
<ul>
<li>Fix crash when creating line.</li>
</ul>

<h2>v2.2.0</h2>
2018-11-20<br>
<b>Improvements</b>
<ul>
<li>Improve performance of selection of terrain.</li>
<li>Handle LandXML with newlines in coordinates.</li>
<li>Allow users to switch between NTRIP and UHF.</li>
<li>Progressbar when loading projects.</li>
<li>Avoid regular jumps in the graphics for large projects.</li>
<li>Improved point visualization.</li>
<li>Support setting UHF-settings.</li>
<li>Reference selection improvements.</li>
<li>Show same sign for roadslope on both side of the road.</li>
</ul>

<b>Bugfixes</b>
<ul>
<li>Fix some plane related crashes</li>
<li>Do not disable calculations if tilt rotator is disconnected and unused.</li>
</ul>
